H3C Technologies H3C Intelligent Management Center - Manual (Page 50)

32
You need to configure the combination of the access policy and the access condition for a service.
An access policy includes:
• Access policy
• Security check
• Proprietary attribute assignment policy
• Internet access control
Security check and internet access control are available after you deploy the EAD component. For more
information about security check and internet access control, see HP IMC EAD Security Policy
Administrator Guide.
To enter the access policy configuration page, click the User tab and select User Access Policy > Access
Policy from the navigation tree, as shown in Figure 20 .
For more configuration information, see " Configuring access policies ."
Figure 20 Entering the access policy configuration page
To enter the proprietary attribute page, click the User tab and select User Access Policy > Access Device
Management > Proprietary Attribute from the navigation tree, as shown in Figure 21 .
For more configuration information, see " Configuring proprietary attribute assignment policies ."