H3C Technologies H3C Intelligent Management Center - Manual (Page 49)

31
Figure 18 Entering the access device configuration page
Configuring the access condition
An access condition refers to the endpoint user's environment when the user accesses the network,
including time, location, endpoint, network type, and other elements. UAM distinguishes users based on
the access conditions.
You need to configure a combination of the access condition and the access policy for a service.
To enter the access condition configuration page, click the User tab and select User Access Policy >
Access Condition from the navigation tree, as shown in Figure 19 . The Access Condition area provides
links to the configuration pages of the access policies and various groups. For more information, see " 7
Configuring access conditions ."
Figure 19 Entering the access condition configuration page
Configuring an access policy
An access policy refers to a set of control rules applied to endpoint users. UAM supports applying
different access policies to users from different access conditions.