H3C Technologies H3C Intelligent Management Center - Manual (Page 74)

56
Figure 44 Recommended configuration procedure for mute terminal authentication
UAM configuration
To configure RADIUS authentication:
1. Configure the access device.
2. Configure the access condition.
3. Configure an access policy.
4. Configure a service.
5. Configure a mute terminal user.
Configuring the access device
Access device configuration is a prerequisite for configuring the access device group of an access
condition. HP recommends configuring the access device first.
You must add the access device's information (such as the vendor name, IP address, port number, and
key) to UAM, so UAM can exchange RADIUS packets with the access device during authentication.
To enter the access device configuration page, click the User tab and select User Access Policy > Access
Device Management > Access Device from the navigation tree, as shown in Figure 45 . For more
configuration information, see " Configuring access devices ."