H3C Technologies H3C Intelligent Management Center User Manual
Page 506
488
LAN access detail records export task contents
{
Task Name—Takes the system-defined name LAN Access Details.
{
Export file path (iMC installation directory)—Directory to save exported data. It is always <IMC
installation directory>\export\uam\detail and is not user configurable.
{
Status—Task status:
−
Disabled—The task is inactive and does not run.
−
Allowed—The task is active and runs regularly.
{
Config—Click the Configure icon to configure the task settings.
Configuring the LAN access detail records export task
1.
Access the Export Task Management page.
2.
On the Export Task Management, click the Configure icon for the LAN Access Details export
task.
The page for configuring the export task appears.
3.
Select or clear the Enable Automatic Export option.
If automatic export is enabled, the page refreshes and displays the parameters of the export task.
4.
Select the Export Interval.
{
Daily—Every day at 01:00 a.m., UAM exports the access detail records for the last day.
{
Hourly—At five past every hour, UAM exports the access detail records for the last hour.
5.
Select the target File Type.
{
TXT—Saves files in .txt format.
{
CSV—Saves files in .csv format.
6.
Enter the Task Description for the management purpose.
Enter the Prefix of Export File.
The target file name takes the form file prefix+detail+export time.
7.
Select the Separator for the text file.
Available options include space, Tab, comma (,), colon (:), pound sign (#), and dollar sign ($). If
the target file format is CSV (.csv), skip this field.
8.
Select or clear the Export by Service option.
If this option is selected, a service list appears. Select one or more services to export their
associated LAN access detail records.
9.
Select or clear the Export to FTP Server option.
If this option is selected, the target file is saved both on IMC and the FTP server. Set the following
parameters:
{
FTP User Name—Enter the username for connecting to the FTP server.
{
FTP Password—Enter the password for connecting to the FTP server.
{
FTP Server IP—Enter the IPv4 address of the FTP server.
Make sure that the same FTP username and password have been configured on the FTP server.
10.
Select or clear the Customize Output option.
TIP:
To bulk-select multiple fields, press the Ctrl key while you are selecting fields.