H3C Technologies H3C Intelligent Management Center - Manual (Page 83)

65
Figure 54 Entering the access policy configuration page
To enter the proprietary attribute assignment policy configuration page, click the User tab and select User
Access Policy > Access Device Management > Proprietary Attribute from the navigation tree, as shown
in Figure 55 .
For more configuration information, see " Configuring proprietary attribute assignment policies ."
Figure 55 Entering the proprietary attribute configuration page
Configuring a service
A service is a set of access policies applied in specific access conditions. You must add services before
adding access users. When you add an access user, apply for a service for the user.
To enter the access service page, click the User tab and select User Access Policy > Access Service from
the navigation tree, as shown in Figure 56 .
For more configuration information, see " Configuring access services ."