H3C Technologies H3C Intelligent Management Center - Manual (Page 82)

64
Figure 53 Entering the access condition configuration page
Configuring an access policy
An access policy refers to a set of control rules applied to endpoint users. UAM supports applying
different access policies to users from different conditions.
You need to configure the combination of the access policy and the access condition for a service.
Therefore, you must configure the access policy.
An access policy includes:
• Access policy
• Security check
• Proprietary attribute assignment policy
• Internet access control
Security check and internet access control are available after you deploy the EAD component. For more
information about security check and internet access control, see HP IMC EAD Security Policy
Administrator Guide.
To enter the access policy configuration page, click the User tab and select User Access Policy > Access
Policy from the navigation tree, as shown in Figure 54 .
For more configuration information, see " Configuring access policies ."