H3C Technologies H3C Intelligent Management Center - Manual (Page 628)

610
The page displays detailed information about the login user.
• Basic Information
{
User Name—Name of the associated platform user.
{
Identity Number—Identity number of the associated platform user.
{
Organization—Contact address of the associated platform user.
{
Telephone—Telephone number of the associated platform user.
{
Email—Email address of the associated platform user.
• User Access Information
{
Account Name—Account name of the access user. The access user uses this name for
authentication.
{
Account Status—Current status of the account. This field must display normal. Otherwise, the
access user cannot log in to the self-service center.
{
Created—Date when the access user was created.
{
Validity Time—Time when the access user becomes valid. An empty field indicates that the
access user is already valid.
{
Expiration Time—Time when the access user will expire. If this field is empty, the access user
never expires.
{
Outer VLAN ID—Outer VLAN ID with which the access user is bound. The user can pass the
authentication only if the packet sent by the user contains the outer VLAN ID. If this field displays
null, the access user does not bind with any outer VLAN ID.
{
Port—Index of a port that the access device uses to connect to an online user. The access user
can pass the authentication only if it connects to the port (on any device). The port number does
not include the chassis slot number or sub-slot number. For example, this field displays 3
regardless of whether the port number is 1/0/3 or 2/0/3. If the Port field is empty, the access
user does not bind with any port.
{
VLAN ID/Inner VLAN ID—List of VLAN IDs or inner VLAN IDs that the access user binds with.
The user can pass the authentication only if the packet sent by the user contains the VLAN ID or
inner VLAN tag. If this field displays null, the access user does not bind with any VLAN ID or
inner VLAN ID.
{
Device IP—IPv4 address of the access device that is bound with the access user. The access user
can pass the authentication only if it connects to the access device using this IPv4 address. The
IPv4 address is the same as what is used to add the access device to UAM. If the Device IP field
is empty, the access user is not bound with any access device.
{
User SSID—SSID that the wireless access user binds with. The access user can pass the
authentication only if it uses this SSID. If this field displays null, the access user does not bind with
any SSID.
{
Device IPv6 Address—IPv6 address of the access device that is bound with the access user. The
access user can pass the authentication only if it connects to the access device using this IPv6
address. The IPv6 address is the same as what is used to add the access device to UAM. If the
Device IPv6 field is empty, the access user is not bound with any IPv6 access device.
{
Computer Name—Name of the computer that the access user binds with. The access user can
pass the authentication only if it uses a computer with this name. If this field displays null, the
access user does not bind with any computer name.