H3C Technologies H3C Intelligent Management Center - Manual (Page 76)

58
Figure 46 Entering the access condition configuration page
Configuring an access policy
An access policy refers to a set of control rules applied to endpoint users. UAM supports applying
different access policies to users from different scenarios.
You need to configure a combination of the access condition and the access policy for a service.
Therefore, you must configure the access policy.
An access policy includes:
• Access policy
• Security check
• Proprietary attribute assignment policy
• Internet access control
Security check and internet access control are available after you deploy the EAD component. For more
information about security check and internet access control, see HP IMC EAD Security Policy
Administrator Guide.
To enter the access policy configuration page, click the User tab and select User Access Policy > Access
Policy from the navigation tree, as shown in Figure 47 .
For more configuration information, see " Configuring access policies ."