H3C Technologies H3C Intelligent Management Center - Manual (Page 84)

66
Figure 56 Entering the access service page
Configuring the LDAP server
Add an LDAP server to allow UAM to read data from the LDAP server.
To enter the LDAP server configuration page, click the User tab and select User Access Policy > LDAP
Service > LDAP Server from the navigation tree, as shown in Figure 57 .
For more configuration information, see " Managing LDAP servers ."
Figure 57 LDAP server configuration page
Configuring an LDAP synchronization policy
Create an LDAP synchronization policy to allow UAM to synchronize user data from the LDAP server
according to the policy.
To enter the LDAP synchronization policy configuration page, click the User tab and select User Access
Policy > LDAP Service > Sync Policy from the navigation tree, as shown in
Figure 58 .