Fast copy – Grass Valley DD35 Family v.3.1.5 User Manual

Page 141

Advertising

2. Panel Operation

DD35 Production Switcher

2 – 107

Operating Instructions – Rev. 16 / 10.2001

2.16

FAST COPY

The fast Copy mode serves the fast copying of complete switcher settings between
the individual M/Es or between individual functions (e.g. Wipe1/2, Key1,2,3 etc.).

2.16.1

ENABLE THE FAST COPY MODE

The enable of the mode is made in the panel Setup. Details are contained in section
4 of this manual.

2.16.2

COPYABLE FUNCTIONS

The following table shows the copyable functions. For copying, the corresponding
source and destination buttons have to be simultaneously (first the source button,
then the destination button) pressed for the duration of 2 seconds.

Source

Destination

Buttons

Note

P/P ... M/E3

Transition group:

Trans Dur

Note 1

M/E1 Memo ... Master Memo

Memo group:

Edit
Store

Note 2

P/P Wipe1 ... M/E Wipe2

Wipe group:

Wipe1
Wipe2

Note 3

P/P Key1 ... M/E3 Key3
(BgdB in Layer mode)

Key group:

Key1
Key2
BGD-A
BGD-B
Key3,

DSK group:

DSK1
DSK2
DSK3

Note 3

P/P ext DSK1 ... DSK3

DSK group:

DSK4
DSK5
DSK6

Note 3

Note 1:

Copies complete M/E without TiM/E Memos

Note 2:

Edit copies all register files
Store copies the contents of the actual source register into the
selected destination register

Note 3:

Copies operational data

Advertising