Grass Valley DD35 Family v.3.1.5 - Manual (Page 265)

3. Menu Operation DD35 Production Switcher
3 – 113 Operating Instructions – Rev. 16 / 10.2001
Delegates the trackball to the Montage Processor
With the softkey Pos Center it is possible to delegate the trackball in
center position.
For details refer to section Introduction.
The image is stored in the Montage Processor as full Frame, Field 1 only or Field
2 only.
Pushing the desired Grab button disables the Freeze mode for one frame or field
to make a snapshot of the life picture.
The Freeze buttons freeze a full Frame, Field 1 only or Field 2 only.
Horizontal and vertical position display for the trackball adjustment in pixel values:
H - 720 ... +720 pixel
V - 576 ... +576 lines (625 lines standard) e.g.
- 507 ... +507 lines (525 lines standard)
The values serve for the orientation in order to reproduce special adjustments.
Positioning per mouse:
Cursor is active when button Postion is activated.
– move mouse: Cursor is moved without positioning
– move mouse with left button pressed: positioning active.
For details refer to section Introduction.
TrackBall
Menu Lock
Grab Frame
Grab Field1
Grab Field2
Freeze Frame
Freeze Field1
Freeze Field2
Position
Digits