Grass Valley DD35 Family v.3.1.5 User Manual
Page 144
2. Panel Operation
DD35 Production Switcher
2 – 110
Operating Instructions – Rev. 16 / 10.2001
2.17.1
INLAY SET1
Pushbutton inlays for configuration modes for pushbuttons Limit set and Limit on
for direct GPO triggering, enable GPO triggering in parallel to Auto and Cut func-
tions, enable Shot Box mode:
Transition
1 2 3 4
Auto
Cut
WP 1
WP 2
MIX
WP 2
Limit
set
Limit
on
DSK
2
DSK
3
Loop
DVE
Mix
Transition type
BLK
Pst
Trans
dur
Trans
PVW
On
On
On
On
Mid
Top
Lx
Lx
Lx
Lx
BGD
B
B
DSK
1
Mid
Wipe
1
Wipe
2
User programmable keys
The function of ”trigger GPOn” is simply to trigger the GPOn when the so pro-
grammed button GPO is pushed.
”Enable GPO trigger” can be switched on/off by pushing the so programmed button
Enable GPO. When on the function of AUTO and CUT in this ME is slightly modi-
fied. AUTO then triggers GPO 2 additionally to the normal function. CUT then trig-
gers GPO 3 additionally to the normal function.
”Enable DVEx shotbox” can be switched on by pushing the so programmmed but-
ton Shot Box 1/2. Switching off is done by pushing a “Next Transition” button.
When onN the ”transition” control field serves as DVE shotbox i.e. all lamps and
displays are switched off, the fader is inactive.
AUTO and CUT have differrent functions:
D
AUTO triggers GPO 2 in DVE1-shotbox mode
D
CUT triggers GPO 3 in DVE1-shotbox mode
D
AUTO triggers GPO 4 in DVE2-shotbox mode
D
CUT triggers GPO 5 in DVE2-shotbox mode