Grass Valley DD35 Family v.3.1.5 - Manual (Page 338)

3. Menu Operation DD35 Production Switcher
3 – 186 Operating Instructions – Rev. 16 / 10.2001
In this index card, many buttons available in the panel sections, can be assigned
to other functions. The functions are individual for each button. Select the desired
function with pressing the Modify button.
From Software Release V2.3.9 onwards, all Next Transition buttons (Bgd A, Bgd
B, Key 1,2,3) are UPKs.
That means that they can be assigned to any UPK function of the Transition panel,
and that the original functions of the buttons are now also available as UPK function
of the Transition panel. The purpose is to shift the button assignment for RPS35–4
panels which are not provided with the button Next–Trans–Key 3:
Old: Bgd B Bgd A Key 1 Key 2
New: Bgd A Key 1 Key 2 Key 3
This causes the problem that the Key 3 button operates in the Layered mode Bgd
A, but Bgd B is missing so that the following assignment would be obtained:
(Layered mode)
Old:
Bgd B Bgd A Key 1 Key 2
New: Bgd A Key 1 Key 2 Bgd A
For this reason, in the UPK index card there is still a special UPK function ”Bgd A
(Bgd B in layered mode)” available for the Layered mode, which normally oper-
ates Bgd A, but in the Layered mode it operates Bgd B. With this function on the
first button, the following assignment is obtained:
(Non–layered mode)
New:
Bgd A Key 1 Key 2 Key 3
(Layered mode)
New:
Bgd B Key 1 Key 2 Bgd A
The 2nd button in the Aux section can be used as follow:
– DD35 mainframe:
Selecting the DVE sources /Ch1...Ch4 with the buttons
Mont Proc1/2
– HD35 mainframe: Aux bus selection (sources 16 ...20)
UPK
User programmable keys