Grass Valley DD35 Family v.3.1.5 - Manual (Page 380)

3. Menu Operation DD35 Production Switcher
3 – 228 Operating Instructions – Rev. 16 / 10.2001
With button Modify the following parameters are selectable:
D
Re-Entry-Feed
Defines the signal that an M/E feeds back to the main internal router for re-entry
in other M/Es. For P/P it defines the signal known as Cleanfeed.
Non-layered mode: PGM Out
BGD only
BGD + Under-key
BGD + Key1 + Key 2
BGD + Key1 + Key2 + Key3
Layered mode: PGM out
1 layer from bottom
2 layer from bottom
3 layer from bottom
4 layer from bottom
D
Cleanfeed defines the Re-Entry-feed in P/P.
D
Look-Ahead PVW
Defines the signal for PVW output:
OFF PVW output = ME output
ON PVW output = Look-Ahead PVW
OnAir PVW ME on air: PVW output = Look-Ahead PVW
ME not on air: PVW output = ME output
D
Operation Mode
Defines the general operation mode for M/E:
act as M/E
act as P/P
D
Clean 2 Out
Defines the effect of Cleanfeed 2, if Cleanfeed 2 is enabled by Fx-send settings:
Non-layered mode: PGM Out
BGD only
BGD + Under-key
BGD + Key1 + Key 2
BGD + Key1 + Key2 + Key3
Layered mode: PGM out
1 layer from bottom
2 layer from bottom
3 layer from bottom
4 layer from bottom