Grass Valley DD35 Family v.3.1.5 - Manual (Page 264)

3. Menu Operation DD35 Production Switcher
3 – 112 Operating Instructions – Rev. 16 / 10.2001
3.9.1.1 Dialog Buttons
Selecting MPR Matte menu.
Selecting MPR Effects menu.
Selecting Pixel Manipulator menu.
Return to the previous menu. For details refer to section Introduction.
3.9.1.2 Function Buttons
If Coupled is selected, the montage processor is in Couple mode, i.e. the two pro-
cessors (MPR1 and MPR2) are initialized with the same position and output
parameters. In this mode the position and output parameters are always identical
for both channels, i.e. a change in one channel has an influence on the other chan-
nel.
The Crop function serves to adapt the blanking to the norm blanking for analog si-
gnals i.e. the black bars on the right and left picture edge will be replaced with the
background color.
If MPR Effects is selected, the pixel manipulator of the respective channel is
enabled. The relevant parameters can be selected in the pixel manipulator menu.
In preparation, not implemented yet.
If PixMan is selected, the pixel manipulator of the respective channel is enabled.
The relevant parameters can be selected in the pixel manipulator menu.
In preparation, not implemented yet.
The output of the Montage Processor is a full Frame, Field 1 only or Field 2 only.
Use the field mode if a movement is in the stored picture or if two different fields
were stored.
Matte
MPR Effects
Pixel Manip
Previous Menu
Coupled
Crop
MPR Effects
PixMan
Readout Frame
Readout Field1
Readout Field2