HEIDENHAIN ND 1300 VED and Crosshair Systems - Manual (Page 203)

183
8
Programming
Archiving and retrieving programs
Programs are included in the settings files and can
be saved and retrieved as part of the complete col-
lection of all QC-300 system settings. To save or
retrieve programs (and all system settings), touch
the Save Settings or Load Settings button on the
Supervisor setup screen.
Refer to Chapter 11: Setup for more details regard-
ing the Save Settings and Load Settings functions.
CAUTION
The settings include all opera-
tional parameters of the QC-300,
including SLEC and other error correction data. When the settings file is loaded from
the USB drive, all existing settings will be overwritten and permanently replaced. Be
sure that all program and settings data are appropriate for your system before loading a new file.
Deleting programs
Programs are deleted by selecting the desired program and
pressing the Cancel key. You will be asked to confirm your
intention to delete the program.
To delete a program, touch the Program tab to display the program screen and then touch a program title
to select the desired program. Then press the Cancel key to delete the program, then touch
the Yes button to confirm your intention.
Running, Archiving, Retrieving and Deleting Programs