Yaskawa SI-EN3D - Manual (Page 43)

Instance
ID
Attribute Name Description Get Set Size Range Default
1 11 Warning
Warning
0: No Warning
1: Warning
O – Byte – 0
1 12 Fault Reset
Fault Reset
0: No Fault Reset
1: Fault Reset
O O Byte 0, 1 0
1 13 Fault Code
Current Fault
Refer to Option Fault Code
Conversion Table on page 43 for
details.
O – Word – 0000
1 15
Control from
Net (Status)
Run Command from the option
0: The Run command is not from the
option
1: Enables the Run command from
option
O – Byte – 0
1 16 NetFaultMode Normal 2 (Vendor Specific) O – Byte – 2
1 17 Force Fault
External Fault
0: No External Fault
1: External Fault (EF0)
Triggered by the rising edge of the
signal.
O O Byte 0, 1 0
1 18 Force Status
External Fault status
0: No External Fault
1: External Fault (EF0)
Triggered by the rising edge of the
signal.
O – Byte – 0
n Option Fault Code Conversion Table
Drive Fault Code (Hex)
(MEMOBUS/Modbus 0080 Hex)
Option Fault Code (Hex) Description
0 0 None
2 3220 DC Bus Undervolt (Uv1)
3 5110 CTL PS Undervolt (Uv2)
4 3222 MC Answerback (Uv3)
6 2120 Ground Fault (GF)
7 2300 Over Current (oC)
8 3210 DC Bus Overvolt (ov)
9 4200 Heatsink Overtemp (oH)
10 4210 Heatsink Max Temp (oH1)
11 2220 Motor Overload (oL1)
12 2200 Drive Overload (oL2)
13 2221 Overtorque Det 1 (oL3)
14 2222 Overtorque Det 2 (oL4)
15 7110 DynBrk Transistor (rr)
16 7112 DynBrk Resistor (rH)
17 9000 External Fault 3 (EF3)
18 9000 External Fault 4 (EF4)
19 9000 External Fault 5 (EF5)
20 9000 External Fault 6 (EF6)
21 9000 External Fault 7 (EF7)
22 9000 External Fault 8 (EF8)
24 7310 Overspeed Det (oS)
25 7310 Speed Deviation (dEv)
26 7301 PG Open (PGo)
27 3130 Input Phase Loss (PF)
28 3130 Output Phase Loss (LF)
10 General Class Objects
YASKAWA SIEP YAICOM 16A 1000-Series Option Dual-Port EtherNet/IP SI-EN3D Technical Manual 43