Yaskawa GPD 506/P5 Section Three - Manual (Page 39)

PP.P5G5.03.Troubleshoot
Page 39
Rev. 06/11/2003
Fault Codes
Parameter Setting Error
- Inverter can’t run. The fault is displayed
on the digital operator, and the fault relay is not activated.
CALL
SI-F/G ComCall
Serial communication transmission error.
Communication has not yet been established.
N/A
Possible Cause(s): Connection is broken, master has stopped communicating.
Corrective Action: Check all connections, verify all user side software configurations.
505 506 515
√