Fault codes, Major fault – Yaskawa GPD 506/P5 Section Three User Manual
Page 9
PP.P5G5.03.Troubleshoot
Page 9
Rev. 06/11/2003
o
l3
Over torque detection function.
A customer programmable current detection. Response
may be selected. A minor fault contact output can be
programmed by using the multi-function outputs.
OL3
Overtorque Det 1
OL4
Overtorque Det 2
N/A
Over torque detection function (2).
A customer programmable current detection.
Response may be selected. A minor fault contact
output can be programmed by using the multi-function
outputs.
505
Possible Cause(s):
Motor is overloaded.
Corrective Action:
Verify the program settings, reduce the load on the motor.
Possible Cause(s):
Motor is overloaded.
Corrective Action:
Verify the program settings, reduce the load on the motor.
Fault Codes
Major Fault
- Motor coasts to a stop, the fault is displayed on the digital
operator, and the fault relay is activated.
506
√
515
√
505
506
515
√