Yaskawa U1000 Industrial MATRIX Drive - Manual (Page 82)

Three-Phase 200 V / 400 V Class
L3
L2
PE
L1
Drive
D
E
C
B
G
H
F
A
D D
A
I
A – Ground the cable shield
B – Enclosure panel
C – Metal plate
D – Grounding surface (remove any
paint or sealant)
E – Drive
F – Motor cable (braided shield cable,
max. 10 m)
G – Motor
H – Cable clamp
I – Ground plate (scrape off any
visible paint)
Figure i.53 EMC Filter and Drive Installation for CE Compliance (Three-Phase 200 V / 400 V Class)
u UL Standards Compliance
The UL/cUL mark applies to products in the United States and Canada. It indicates that UL has performed product testing and
evaluation, and determined that their stringent standards for product safety have been met. For a product to receive UL
certification, all components inside that product must also receive UL certification.
Figure i.54 UL/cUL Mark
This drive is tested in accordance with UL standard UL508C and complies with UL requirements. The conditions described
below must be met to maintain compliance when using this drive in combination with other equipment:
n Installation Area
Do not install the drive to an area greater than pollution degree 2 (UL standard).
i.9 Standards Compliance
82 YASKAWA ELECTRIC TOEP C710636 04C U1000 Industrial MATRIX Drive Quick Start Guide