1 specifications – Yaskawa 260IF DeviceNet System User Manual
Page 21
Basic Specifications
2-2
2
2.1 Specifications
The basic specifications are given for the Interface Module in the following table.
Item
Specifications
Name
260IF Module
Model Number
JEPMC-CM230
Circuit Number
1
Applicable Communications Type
I/O communications
Explicit messages
(Both conform to DeviceNet.)
I/O Communi-
cations
Max. No. of Slaves
63 nodes
Max. I/O Bytes
2048 bytes, 256 bytes/node
Message
Communica-
tions
(Master Only)
Max. No. of Nodes
for Message
Communications
63 nodes. Simultaneous communications possible with up to 8
nodes.
Max. Message
Length
256 bytes
Function for
Execution
MSG-SND
Switches for Settings
Two rotary switches on the front: for node address
DIP switch on the front: Baud rate
Master/slave selection
Indicators
Two LED indicators: MS and NS
Communications Power Supply
Voltage
24 VDC±10% (supplied from a special cable)
Current Consumption
Communications power supply: 45 mA max. (supplied from
the communications connector)
Internal circuit power supply (supplied from the PLC)
Mass
100 g
Dimensions (mm)
40
× 130 × 105 (W × H × D)