Yaskawa 260IF DeviceNet System - Manual (Page 9)

Using This Manual
x
Using This Manual
Intended Audience
This manual is intended for the following users.
• Those responsible for estimating the 260IF Module
• Those responsible for deciding whether to apply the 260IF Module
• Those responsible for designing the 260IF Module so that it can be mounted in the con-
trol and operation panels
• Those responsible for making, inspecting, testing, adjusting, and maintaining the control
and operation panels in which the 260IF Module is mounted
Description of Technical Terms
In this manual, the following terms are defined as follows:
• PP = Programming Panel
• PC = Programmable Logic Controller
• 260IF = The DeviceNet Option Module for use with MP900 Series Machine Controllers
• “--" in “MOV [axis1]--..." represents numeric data for axis 1.
Inverted Signals
In this manual, a slash (/) is placed in front of the name of any signal that is valid when low
(L).
• S-ON ＝ /S-ON
• P-CON ＝ /P-CON
Registered Trademark
• DeviceNet is a registered trademark of ODVA (Open DeviceNet Vender
Association，Inc.).