Yaskawa 260IF DeviceNet System - Manual (Page 55)

Programming
5.2.3 Parameter List
5-6
5
Error Classifications
Error Content Meaning
81xx Function code error An unused function code was received or an
attempt was made to send an unused function
code.
82xx Address setting error The data address, coil offset, input relay offset,
input register offset, or holding register offset is
out of the setting range.
83xx Data size error The send or receive data size setting is out of the
setting range.
84xx Circuit number setting error The circuit number is out of the setting range.
85xx Channel number setting
error The channel number is out of the setting range.
86xx Node address error The node address is out of the setting range.
88xx Communications section
error An error response has been returned from the
communications section.
89xx Device selection error A device that cannot be used has been selected.