3 switch specifications, Sw2 and sw3 – Yaskawa 260IF DeviceNet System User Manual
Page 23
Advertising
Basic Specifications
2.2.1 260IF Module
2-4
2
2.3 Switch Specifications
Refer to 4.1 Basic Use of the 260IF Module for setting details.
SW1
The baud rate for DeviceNet communications and Slave/Master settings are made on this
DIP switch.
Table 2.1 SW1 Specifications
SW2 and SW3
These rotary switches are used to set the DeviceNet MAC ID.
Table 2.2 SW2 and SW3 Specifications
Pin
Meaning
Setting
DR0
DeviceNet
baud rate
DR1
DR0
OFF
OFF
125 kbps (default)
DR1
OFF
ON
250 kbps
ON
OFF
500 kbps
ON
ON
(Do not change)
X1
Slave/Master setting
OFF
Slave (default)
ON
Master
X2
Not used
Always OFF
Switch
Meaning
Setting
*10 (SW2)
MAC ID 10’s digit
0 to 6
Set a two-digit local node MAC ID (0 to 63) in
decimal using two rotary switches (default: 00).
*1 (SW3)
MAC ID 1’s digit
0 to 9
Advertising