Xerox WorkCentre 7835ii - Manual (Page 222)

Maintenance
222 Xerox ® WorkCentre ® 7800/7800i Series Color Multifunction Printer
User Guide
8. Grip the staple cartridge by the orange handle and insert it into the stapler until it clicks to lock in
place.
9. Close the finisher front door.
Replacing Staples in the Booklet Maker of the Office Finisher LX
WARNING: Do not perform this procedure while the printer is copying or printing.
1. Open the finisher side cover.
2. If the staple cartridges are not visible, grip the vertical panels at the left and right of the opening
and slide them to the center.