RISCO Group ACUS - Manual (Page 44)

ACUS Quick Start Guide
Uncontrolled when printed © RISCO Group 43
31. Click Cancel, you return to the Define Automation dialog box.
32. Click Cancel. You return to the Events and Alarm Configuration screen.
To configure Alarm Settings:
1. Click the Alarm Settings tab.
2. In the Priority and Automation area,
select the default priority of the alarm
from the Default Priority drop-down
list.
3. In the Acknowledge Timeout field,
enter the time after which the
automation added to this alarm will be
executed automatically.
Figure 56: Alarm Settings for an Event
4. Select Minutes from the adjacent drop-down list.
5. Select the automation that should run after the alarm is acknowledged from the On
Timeout Execute drop-down list.
Note: In case you need to add a new automation, click Manage Automation to add, edit,
duplicate or delete automation. The Automation dialog box appears. For details, refer
to section
14 Using Automation in the ACUS User Manual .
6. Click the Use Default Map of Event source option button to display the Map of the
location from where the event is generated in the Alarm Handling Dashboard.
Or
Click Choose Map option button and select the required map from the drop-down list. This
map will appear when you handle alarms in the Alarm Handling Dashboard.
7. In the Additional Info area, enter any additional information about the event in the
Additional Information field.
8. Select the Show Event Description in Alarm Alert check box to display the
description on the alarm alert.
9. Select the Show Additional Information in Alarm Alert check box to display the
information added in the Additional Information field.
10. Select the Alarm Closure Description is Mandatory check box to ensure that a
description is added when the Event Closure is reported.
You report event closure in the Alarm Handling Dashboard. For details, refer to section 9
Monitoring Events and Alarms in the ACUS User Manual .
In the Alarm Pop up Automation Triggering Buttons area, you configure the buttons that
should appear on the alarm alert.