TA Triumph-Adler P-4030 MFP - Manual (Page 111)

3-13
Preparation before Use > Loading Paper
When you load envelopes or cardstock in the multi purpose tray
Switching to Envelop Mode
To print on an envelope, follow the procedure below to switch to envelope mode.
1 Open the rear cover.
2 Raise the envelope lever.
3 Close the rear cover.
NOTE
When the printing on envelopes is completed, return the envelope lever to its original position (at the bottom).
CAUTION
The fuser unit inside the machine is hot. Do not touch it with your hands as it may
result in burn injury.