System/network, System/network -8, Network setting – TA Triumph-Adler P-4030 MFP User Manual
Page 257
8-8
Setup and Registration (System Menu) > System Menu
System/Network
Configure machine system settings.
Network Setting
Configure network settings.
TCP/IP Settings
NOTE
This function is displayed when the optional Network Interface Kit is installed.
System/Network
Network
Setting
TCP/IP
Settings
Item
Description
TCP/IP
Settings
TCP/IP
Select whether to use TCP/IP Protocol.
Value
: Off, On
IPv4 Setting
Set up TCP/IP (IPv4) to connect to the network. This setting is available when
[TCP/IP] is set to [On].
DHCP
Select whether to use the DHCP (IPv4) server.
Value
: Off, On
Auto-IP
Select whether to use Auto-IP.
Value
: Off, On
IP Address
Set the IP addresses.
Value
: ###.###.###.###
NOTE
If DHCP is set to [On], this item is displayed only and cannot be entered.
Subnet Mask
Set the IP subnet masks.
Value
: ###.###.###.###
NOTE
If DHCP is set to [On], this item is displayed only and cannot be entered.
Default Gateway
Set the IP gateway addresses.
Value
: ###.###.###.###
NOTE
If DHCP is set to [On], this item is displayed only and cannot be entered.
IPv6 Setting
Set up TCP/IP (IPv6) to connect to the network. This setting is available when
[TCP/IP] is [On].
Select whether to use IPv6.
Value
: Off, On
NOTE
The IPv6 settings are configured from the Embedded Web Server RX. Refer to
the Embedded Web Server RX User Guide.
Bonjour
Select whether to use Bonjour.
Value
: Off, On