TA Triumph-Adler P-4030 MFP User Manual
Page 57
2-15
Installing and Setting up the Machine > Default Settings of the Machine
7
Use the numeric keys or press the [
▲
] or [
▼
] key to set the subnet mask.
You can set any value between 000 and 255. The entry method is the same method as the IP
address.
8
Press the [
OK
] key.
9
Press the [
▲
] or [
▼
] key to select [Default Gateway], and press the [
OK
] key.
10
Use the numeric keys or press the [
▲
] or [
▼
] key to set the default gateway.
You can set any value between 000 and 255. The entry method is the same method as the IP
address.
11
Press the [
OK
] key.
IMPORTANT
After changing the setting, restart the network from System Menu, or turn the
machine OFF and then ON.
NOTE
The network can be configured from the computer by using Embedded Web Server RX.
Refer to the Embedded Web Server RX User Guide.
Subnet Mask:
0.
0. 0. 0
2
1
IPv4 Setting:
IP Address
Exit
03
Subnet Mask
04
Default Gateway
05
Default Gateway:
0.
0. 0. 0