TA Triumph-Adler P-4030 MFP - Manual (Page 252)

8-3
Setup and Registration (System Menu) > System Menu
System Menu Settings
This section explains the functions that can be configured in System Menu. To configure the settings, select the item in
System Menu and press the setting item. For details on each function, see the table below.
Item Description
Reference
Page
Report Print reports to check the machine settings, status, and history. Settings
for printing reports can also be configured. page 8-5
Report Print Configure settings for printing reports and histories. page 8-5
Admin Rpt Set. Refer to the
FAX
Operation
Guide.
Result Rpt Set. page 8-6
Job Log History page 8-7
Counter Check the number of sheets printed and scanned. page 2-34
System/Network Configure machine system settings. page 8-8
Network Setting Configure network settings. page 8-8
Optional Network Configure settings for the optional Network Interface Kit. page 8-12
Network (Wi-Fi) Configure settings for the optional Wireless Network Interface Kit. page 8-13
NW InterfaceSend Specify the network interface card to be used for the send function, the
network authentication and connecting to external address book. page 8-15
I/F Block Set. Protect this machine by blocking the interface with external devices such
as USB device or optional interfaces. page 8-15
Security Level The Security Level setting is primarily a menu option used by service
personnel for maintenance work. There is no need for customers to use
this menu. page 8-16
Data Security Configure settings for data stored in the machine's memory and optional
SSD. page 8-16
Restart Restart the CPU without turning the main power switch off. Use this to
deal with any unstable operation by the machine. (Same as the computer
restart.) page 8-17
Op Functions You can activate the optional applications installed on this machine. page 8-17
User/Job Account Configure settings related to machine management. For details on User
Login, refer to
Overview of User Login Administration on page 9-2 , and
for details on Job Accounting, refer to Overview of Job Accounting on
page 9-22 .
―
User Property Check and change information related to the logged in user. page 8-17