TA Triumph-Adler P-4030 MFP - Manual (Page 264)

8-15
Setup and Registration (System Menu) > System Menu
Basic
For details on setting value, refer to Basic (page 8-12) .
NW InterfaceSend (Network Interface (Send))
I/F Block Set. (Interface Block Setting)
Protect this machine by blocking the interface with external devices such as USB device or optional interfaces.
System/Network Network (Wi-Fi) Basic
System/Network NW InterfaceSend
NOTE
This function is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Item Description
NW
InterfaceSend Specify the network interface card to be used for the send function, the network authentication and
connecting to external address book.
Value : Standard, Optional NIC
System/Network I/F Block Set.
Item Description
I/F Block Set. USB Host This locks and protects the USB memory slot or USB port (USB host).
Value : Unblock, Block
USB Device This locks and protects the USB interface connector (USB Device).
Value : Unblock, Block
USB Storage This locks and protects the USB memory slot.
Value : Unblock, Block
NOTE
This function is available when USB Host is set to [Unblock].
Option I/F 1
*1
*1 [Option I/F] is displayed on P-4030 MFP.
This locks and protects the optional interface slots.
Value : Unblock, Block
NOTE
If the machine has two optional interface slots, you can set this feature for each slot.
Option I/F 2 *2
*2 Only on products with the fax function installed.
IMPORTANT
After changing the setting, restart the system or turn the machine OFF and then ON.