Local authoriz. (local authorization), Local authoriz. (local authorization) -17 – TA Triumph-Adler P-4030 MFP User Manual
Page 304
9-17
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Local Authoriz. (Local Authorization)
Select whether or not to use Local Authorization.
1
Display the screen.
1
Press the [
System Menu/Counter
] key.
2
Press the [
▲
] or [
▼
] key to select [User/Job Account], and press the [
OK
] key.
3
Press the [
▲
] or [
▼
] key to select [User Login Set.], and press the [
OK
] key.
2
Configure the setting.
1
Press the [
▲
] or [
▼
] key to select [Local Authoriz.], and press the [
OK
] key.
2
Press the [
▲
] or [
▼
] key to select [Off] or [On], and press the [
OK
] key.
NOTE
When using Local Authorization, the user authentication type must be set to [Local Authentic.]. For details, refer to
Enabling User Login Administration on page 9-3
.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and press [Login].
The factory default login user name and login password are set as shown below.
Sys. Menu/Count.:
User/Job Account
Exit
04
Counter
03
02
System/Network
Login User Name
Login Password
4000
4000