TA Triumph-Adler P-4030 MFP User Manual
Page 263
8-14
Setup and Registration (System Menu) > System Menu
Wireless
Network
Custom Setup
The detailed settings for wireless LAN can be changed. Set the items below then
press [Connect] to start the connection.
Netwk Name (SSID)
Set the SSID (Service Set Identifier) of the wireless LAN to which the machine
connects.
NOTE
Up to 32 characters can be entered. Refer to the
for details on entering characters.
Connection Mode
Set the connection mode.
Value
Ad Hoc: Directly communicates with the device without going through an
access point. This method cannot be used to connect to two or more
devices.
Infrastructure: Performs communication through an access point.
Channel
Set channel.
Use the [
▲
] or [
▼
] key or the numeric keys to enter a number.
NOTE
The Channel can be set between 1 and 11.
Netwk Authentic.
Select network authentication type.
To select other options, open the device home page from a computer.
Value
: Open, Shared, WPA-PSK
*1
, WPA2-PSK
Encryption
Select encryption settings. The setting values vary depending on the “Netwk
Authentic.” setting.
Data Encryption
Set the encryption method.
Value
When "Netwk Authentic." is set to [Open] or [Shared]:
Disable, WEP
When "Netwk Authentic." is set to [WPA-PSK] or [WPA2-PSK]:
TKIP
*2
, AES, Auto
WEP Key
Register the WEP key. Press [Edit] and Enter the WEP Key using the numeric
keys.
NOTE
Up to 26 characters can be entered. Refer to the
for details on entering characters.
Preshared Key
*3
Register the Preshared Key. Press [Edit] and Enter the Preshared Key using the
numeric keys.
NOTE
The number of characters is between 8 and 64. Refer to the
for details on entering characters.
*1 Not displayed if you selected [Ad Hoc] for "Connection Mode".
*2 Not displayed if you selected [WPA2-PSK] for "Netwk Authentic.".
*3 Displayed if you selected [WPA-PSK] or [WPA2-PSK] for "Netwk Authentic.".
Item
Description