TA Triumph-Adler P-4030 MFP - Manual (Page 62)

2-20
Installing and Setting up the Machine > Energy Saver function
3 Press the [ ▲ ] or [ ▼ ] key to select [Timer Setting], and press the [ OK ] key.
4 Press the [ ▲ ] or [ ▼ ] key to select [Sleep Timer], and press the [ OK ] key.
2 Set the Sleep time.
Use the numeric key or press the [ ▲ ] or [ ▼ ] key to enter the Sleep time, and press the [ OK ]
key.
Sleep Rules (models for Europe)
You can set whether sleep mode operates for each function. When the machine enters sleep mode, the ID card cannot
be recognized.
For more information on Sleep Rules settings, refer to Sleep Rules (models for Europe) on page 8-26 .
Follow the steps below to use Sleep mode for each function.
1 Display the screen.
1 Press the [ System Menu/Counter ] key.
2 Press the [ ▲ ] or [ ▼ ] key to select [Common Settings], and press the [ OK ] key.
3 Press the [ ▲ ] or [ ▼ ] key to select [Timer Setting], and press the [ OK ] key.
2 1
Common Settings:
Date Setting
Exit
08
Timer Setting 10
Error Handling
09
2 1
Timer Setting:
Low Power Timer
Exit
03
Sleep Level 04
Sleep Timer 05
Sleep Timer:
1
(1 - 240)
min.
2 1
Sys. Menu/Count.:
User/Job Account
Exit
04
User Property 05
Common Settings 06
2 1
Common Settings:
Date Setting
Exit
08
Timer Setting 10
Error Handling
09