TA Triumph-Adler P-4030 MFP User Manual
Page 345
10-20
Troubleshooting > Troubleshooting
R
Print overrun. Job is
paused.
—
Warning. Low printer memory. The
job was paused. Press [Continue] to
restart the job.
—
Printing multiple copies is
not allowed.
—
Only one copy is available. Press
[Continue] to continue printing.
Press [Cancel] to cancel the job.
—
Message
Checkpoints
Corrective Actions
Reference
Page
RAM disk error. Press [OK]. ―
An error has occurred on the RAM
disk. Job is canceled. Press the
[
OK
] key.
The possible error codes and their
descriptions are as follows.
04: Insufficient space on the RAM
disk. If the optional RAM disk is
installed, increase the RAM disk
size by changing “RAM Disk
Setting” in System Menu.
NOTE
The range of RAM disk size can be
increased by selecting [Printer
Priority] in “Optional Memory”.
Removable Memory is full.
Job is canceled.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details on
Auto Error Clear, refer to
―
Job is canceled. Press [End].
Insufficient free space in the
removable memory. Delete
unneeded files.
―
Remove originals in the
document processor.
Are there any originals left in the
document processor?
Remove originals from the
document processor.
―
Replace all originals and
press Start key.
—
Remove originals from the
document processor, put them back
in their original order, and place
them again. Press [Cancel] to
cancel the job.
—
Restricted by Job
Accounting. Job is
canceled.
—
This job is canceled because it is
restricted by Job Accounting. Press
the [
OK
] key.
—
Message
Checkpoints
Corrective Actions
Reference
Page