Kyocera Taskalfa 3511i - Manual (Page 426)

8-72
Setup and Registration (System Menu) > System Menu
Adjustment/Maintenance
[System Menu/Counter] key > [Adjustment/Maintenance]
Adjust printing quality and conduct machine maintenance.
Item Description
Density Adjustment Adjust density.
Copy Adjust copy density. Adjustment can be made in 7 levels.
Value : -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Send/Box Adjust scan density when sending or storing the data in Document Box. Adjustment
can be made in 7 levels.
Value : -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
FAX *1
FAX Operation Guide
Background Density Adj. Darkens or lightens overall background density adjustment.
Copy (Auto) Darkens or lightens overall background density adjustment during copying.
Adjustment can be made in 7 levels.
Value : -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Send/Box (Auto) Darkens or lightens overall background density when sending images or storing them
in the Document Box. Adjustment can be made in 7 levels.
Value : -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Sharpness Adjustment Adjust the sharpness of the image outline.
Copy All Sharpen or blur overall image outlines during copying. Adjustment can be made in 7
levels.
Value : -3 (Blur), -2, -1, 0, +1, +2, +3 (Sharpen)
Text/Fine
Line Sharpen text/fine line during copying. Adjustment can be made in 4 levels.
Value : 0 (Normal), 1, 2, 3 (Sharpen)
Send/Box All Sharpen or blur overall image outlines when sending or storing them in the Document
Box. Adjustment can be made in 7 levels.
Value : -3 (Blur), -2, -1, 0, +1, +2, +3 (Sharpen)
Text/Fine
Line Adjust sharpness of the text/fine line when during sending or storing them in the
Document Box. Adjustment can be made in 4 levels.
Value : 0 (Normal), 1, 2, 3 (Sharpen)
Correcting Black Lines Correct fine lines (streaks caused by contamination), which may appear on the
image, when the document processor is used.
Value
Off: No correction performed.
On (Low): Correction performed. The reproduction of fine lines on the original
may become lighter than when using [Off].
On (High): Select this item if a streak remains after using [On (Low)]. The
reproduction of fine lines on the original may become lighter than when using
[On (Low)].
System Initialization Initialize the hard disk/SSD installed on the machine to return it to the factory defaults.
NOTE
This function will not be displayed when the optional Data Security Kit is activated.