Kyocera Taskalfa 3511i - Manual (Page 498)

10-17
Troubleshooting > Troubleshooting
2 or more sheets are
overlaps when ejected.
(multi feed) ― Load the paper correctly. page 3-2
Printouts are wrinkled. Is the paper loaded correctly? Load the paper correctly. page 3-4
― Turn the orientation 180 degrees
around in which the paper is
positioned. page 3-4
Is the paper damp? Replace the paper with new paper. page 3-4
Printouts are curled. ― Turn the paper over in the cassette,
or turn the orientation 180 degrees
around in which the paper is
positioned. page 3-4
Is the paper damp? Replace the paper with new paper. page 3-4
Printer driver cannot be
installed. Is the driver installed with the host
name while Wi-Fi or Wi-Fi Direct
function is available? Specify the IP address instead of
the host name. page 2-47
Cannot print. Is the machine plugged in? Plug the power cord into an AC
outlet. ―
Is the machine powered on? Turn on the main power switch. page 2-2
Are the printer cable and network
cable connected? Connect the correct printer cable
and network cable securely. page 2-7
Is the print job paused? Resume printing. page 7-11
When the wired or Wi-Fi network is
configured using the name
resolution, does the IP address
(private address) of the other
network which can not access
coexists? The number of host name and
domain name which can be used
with the machine is one
respectively. Configure the network
under this restriction. ―
Change the settings of name
resolution such as NetBEUI and
DNS, or network environment
settings. Command
Center RX
User
Guide
Select Wi-Fi, Wired Network or
Optional Network as an unlimited-
use network on Primary Network
(Client). page 8-62
Set to [Wired] or [Wi-Fi] either one
of [On], and set the other setting to
[Off]. page 8-54
Symptom Checkpoints Corrective Actions
Reference
Page