Kyocera Taskalfa 3511i - Manual (Page 436)

9-8
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Adding a User (Local User List)
You can add up to 1,000 users (including the default login user name).
1 Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 "User Login Setting" [Next] > "Local User List" [Add/Edit]
2 Enter the user information.
[Add] > Enter the user information > [OK]
NOTE
By default, one of each default user with machine administrator rights and administrator privileges is already stored.
Each user's properties are:
Machine Administrator
User Name:
DeviceAdmin
Login User Name: TASKalfa 3011i: 3000, TASKalfa 3511i: 3500
Login Password: TASKalfa 3011i: 3000, TASKalfa 3511i: 3500
Access Level: Machine Administrator
Administrator
User Name:
Admin
Login User Name: Admin
Login Password: Admin
Access Level: Administrator
* Upper case and lower case letters are distinguished (case sensitive).
It is recommended to periodically change the user name, login user name and login password regularly for your
security.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Item Descriptions
User Name Enter the name displayed on the user list (up to 32 characters).
Login User
Name Enter the login user name to login (up to 64 characters). The same
login user name cannot be registered.
Login Password Enter the password to login (up to 64 characters). Reenter the same
password for confirmation and select the [OK] key.
Access Level Select "Administrator" or "User" for user access privileges.
Model Name Login User Name Login Password
TASKalfa 3011i 3000 3000
TASKalfa 3511i 3500 3500