Kyocera Taskalfa 3511i - Manual (Page 502)

10-21
Troubleshooting > Troubleshooting
Printed images are fuzzy.
Printed images are cut
off. Is the machine being used in
conditions of very humid, or
humidity or temperature rapidly
changes? Use in an environment that has
suitable humidity. ―
― Run [Drum Refresh]. page 10-40
Printed images are
skewed. Are the originals placed correctly? When placing originals on the platen,
align them with the original size
indicator plates. page 5-2
When placing originals in the
document processor, align the
original width guides securely before
placing the originals. page 5-3
Is the paper loaded correctly? Check the position of the paper
width guides. page 3-4
― Perform center line adjustment. For
more information about how to do
so, contact your service
representative. ―
Irregular horizontal lines
appear in the image. ― Contact your service representative. ―
Printed images have
vertical lines. Is the slit glass dirty? Clean the slit glass. page 10-3
Dirt on the top edge or
back of the paper. Check the machine interior. Open the right cover. If the machine
interior is dirty with toner, clean it
using soft, dry, lint-free cloth. ―
Symptom Checkpoints Corrective Actions
Reference
Page