Print density – Kyocera Taskalfa 3511i User Manual
Page 427
8-73
Setup and Registration (System Menu) > System Menu
Display Brightness
Set the brightness of the touch panel.
Value
: 1 (Darker), 2, 3, 4, 5 (Lighter)
Silent Mode
Set the Silent Mode. Select this mode when the running noise is uncomfortable.
Value
: Off, On
NOTE
When [On] is selected, it may take time for the next print job to start.
Auto Color Correction
This setting allows you to adjust the detection level used by the machine to determine
whether the original is color or black and white in Auto Color Selection Mode. Setting
a lower value will result in more originals being identified as color, while a larger value
will tend to increase the number of originals being identified as black and white.
Value
: 1 (Color), 2, 3, 4, 5 (B & W)
Tone Curve Adjustment
After prolonged use, or from the effects of surrounding temperature or humidity, the
printed output tone may differ from the original. Perform this function to ensure
consistency with the original tone.
Tone Curve Adjustment (page 10-39)
Drum Refresh
Remove image blur and white dots from the printout. It takes about 1 minute. The
time required may vary depending on the operating environment.
NOTE
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the
printing is done.
Memory Diagnostics
Perform this function to check the machine memory.
Contrast
You can increase or decrease the overall contrast.
Copy
Increases or decreases the overall contrast of copies.
Value
: -3 (Lower), -2, -1, 0 (Normal), +1, +2, +3 (Higher)
Send/Box
Increases or decreases the overall contrast when documents are sent or saved in a
document box.
Value
: -3 (Lower), -2, -1, 0 (Normal), +1, +2, +3 (Higher)
Auto Drum Refresh
Select the time length of the drum refresh.
Value
Off: The Auto Drum Refresh will not be performed.
Short: Perform Auto Drum Refresh as Short.
Standard: Perform Auto Drum Refresh as Standard.
Long: Perform Auto Drum Refresh as Long.
Print Density
Adjust print density. Adjustment can be made in 5 levels.
Value
: 1 to 5
*1 Displayed only when the optional FAX Kit is installed.
Item
Description