Panasonic LinkRay 70" Class Full HD Commercial LED Display - Manual (Page 10)

English
10
CAUTION
If problems or malfunction occur, stop using
immediately.
■
If problems occur, unplug the power supply
plug.
• Smoke or an abnormal odour come out from the unit.
• No picture appears or no sound is heard,
occasionally.
• Liquid such as water or foreign objects got inside the
unit.
• The unit has deformed or broken parts.
If you continue to use the unit in this condition, it
could result in fire or electric shock.
• Turn the power off immediately, unplug the power
supply plug from the wall outlet, and then contact the
dealer for repairs.
• To cut off the power supply to this Display completely,
you need to unplug the power supply plug from the
wall outlet.
• Repairing the unit yourself is dangerous, and shall
never be done.
• To enable to unplug the power supply plug
immediately, use the wall outlet which you can reach
easily.
■
Do not touch the unit directly by hand when
it is damaged.
Electric shock could occur.
■
When using the LCD Display
At least 2 people are required to carry or unpack
this unit.
• If this is not observed, the unit may drop, resulting in
injury.
Be sure to disconnect all cables and overturn
prevention accessories before moving the Display.
• If the Display is moved while some of the cables are
still connected, the cables may become damaged,
and fire or electric shock could result.
Disconnect the power supply plug from the wall
socket as a safety precaution before carrying out
any cleaning.
• Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it
becoming dusty.
• If dust built up on the power cord plug, the resultant
humidity can damage the insulation, which could
result in fire. Pull the power cord plug out from the
wall outlet and wipe the mains lead with a dry cloth.
Do not step on, or hang from the display or the
Pedestal.
• They might tip over, or might be broken and it may
result in injury. Pay special attention to the children.
Do not reverse the polarity (+ and -) of the battery
when inserting.
• Mishandling the battery may cause its explosion
or leakage, resulting in fire, injury or damage to
surrounding properties.
• Insert the battery correctly as instructed. (see page
14)
Do not use batteries with the outer cover peeling
away or removed.
(The outer cover is attached to the battery for safety.
It must not be removed. Doing so may cause short
circuits.)
• Mishandling the batteries may cause the batteries
to short circuit, resulting in fire, injury or damage to
surrounding properties.
Remove the batteries from the remote control
transmitter when not using for a long period of time.
• The battery may leak, heat, ignite or burst, resulting in
fire or damage to surrounding properties.
Do not burn or breakup batteries.
• Batteries must not be exposed to excessive heat such
as sunshine, fire or the like.
Do not turn the Display upside down.
Do not position the unit with its liquid crystal panel
facing upright.