Remote control batteries, Kensington security – Panasonic LinkRay 70" Class Full HD Commercial LED Display User Manual

Page 14

Advertising
background image

English

14

Remote Control Batteries

1. Pull and hold the hook, then open the battery cover.

2. Insert batteries - note correct polarity (+ and -).

AAA/R03/LR03 type

3. Replace the cover.

Helpful Hint

For frequent remote control users, replace old

batteries with Alkaline batteries for longer life.

Precaution on battery use

Incorrect installation of the batteries can cause battery

leakage and corrosion that will damage the remote

control transmitter.
Disposal of batteries should be in an environment-

friendly manner.

Observe the following precaution:

1. Batteries shall always be replaced as a pair. Always

use new batteries when replacing the old set.

2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: “Zinc Carbon” with

“Alkaline”).

4. Do not attempt to charge, short-circuit, disassemble,

heat or burn used batteries.

5. Battery replacement is necessary when remote

control acts sporadically or stops operating the

Display set.

6. Do not burn or breakup batteries.
7. Batteries must not be exposed to excessive heat such

as sunshine, fire or the like.

Kensington security

The security slot of this unit is compatible with the

Kensington security slot.

65-inch model

55-inch model

49-inch model

43-inch model

Advertising