Panasonic LinkRay 70" Class Full HD Commercial LED Display - Manual (Page 55)

55
English
Note
● Set the input to something other than [USB] or
[MEMORY VIEWER], and read the image.
● One user image can be registered for [Startup
image settings] and [No signal image settings]
respectively.
● Do not turn the power off while reading the user
image.
● The selected image is previewed on the [Read user
image] submenu screen.
● When USB memory device is not connected to the
USB terminal, [Read user image] is greyed out and
cannot be selected.
● If starting to read the image while creating the
preview image, an access error will occur, and the
image may not be recognized as a image file.
Confirm the preview image display, and then start
reading process.
● The displayed file names are restricted as follows.
• Applicable extension: jpg, jpe, jpeg or bmp
• The file name is not “.jpg”, “.jpe”, “.jpeg”, or
“.bmp” which start with dot (.).
● Depending on the OS setting, folders or files in the
USB memory invisible on your computer may be
displayed on this unit.
[Clear user image]
Clears the image registered in [Read user image].
[Startup image settings] - submenu screen
Startup image settings
Display setting
User image
On
Image select
Clear user image
Read user image
Note
● When there is no [User image] that have been read,
[Clear user image] is greyed out and cannot be
selected.
● When [Image select] is set to [User image],
performing [Clear user image] will change the
setting of [Image select] to [Default image].
Wobbling
Automatically shifts the display image (therefore
unnoticeable to the eye) to prevent image retention of
sharper contour of image.
Setting this to [On] moves the screen position at certain
intervals and displays the images.
Note
● If [Multi display setting] is set to [On], this function
does not operate. (see page 56)
● When this function is operating, part of the screen
may appear to be missing.
No activity power off
When this function is set to [Enable], the power is turned
off (standby) automatically when there is no operation of
the Display for 4 hours.
Starting from 3 minutes before the turn off, the
remaining time will be displayed.
No activity power off
Press any key to abort.
3 min
When the power is turned off due to this function, a
message [Last turn off due to ‘No activity power off’.]
is displayed next time the power is turned on.
When the image set in [No signal image settings] (see
page 54) is displayed, remaining time is not displayed
even when the power is going to be turned off in 3
minutes. Instead, the image is displayed until the
power is turned off.
Note
● While the screensaver is running, this function is
disabled.
OSD language
Select your preferred language.
Selectable languages
English(UK)
Deutsch
Français
Italiano
Español
ENGLISH(US)
中文
: Chinese
日本語
: Japanese
Русский : Russian