Panasonic LinkRay 70" Class Full HD Commercial LED Display - Manual (Page 33)

33
English
Sound mute On / Off
It is useful when you want to mute the sound temporarily,
for example, when answering the phone or door.
Press <MUTE>.
● appears on the screen and the sound is muted.
Press again to reactivate the sound.
● It is also reactivated when the power is turned on / off
or the volume level is changed.
● While MUTE is active, is displayed as a reminder
after operation.
● When the image set in [No signal image settings]
(see page 54) is displayed, is not displayed after
operation.
● In [ENGLISH(US)] OSD language, is displayed as
[MUTE].
OFF TIMER
The Display can be preset to switch to stand-by after a
fixed period. (30 min, 60 min, 90 min)
The setting switches each time <OFF TIMER> is
pressed.
● [0 min ] → [ 30 min ] → [ 60 min ] → [ 90 min]
→ [ 0 min] (Cancel)
● When three minutes remain, the remaining time will
flash (Red). After that, it switches to stand-by.
● To see the Off timer remaining time, press
<RECALL>.
● The Off timer is cancelled if a power interruption
occurs. When the power is turned on later on, it will
be in stand-by condition.
● When the image set in [No signal image settings] (see
page 54) is displayed, remaining time is not displayed
even when the timer expires in 3 minutes. Instead,
the image is displayed until the power is turned off.
Press <RECALL> to check the remaining time.