Panasonic LinkRay 70" Class Full HD Commercial LED Display - Manual (Page 119)

119
English
■
Unit
1 Press <MENU (Unit)> for several
times and display the [Setup] menu.
2 Select [Menu display duration] with
, and then press and hold <ENTER
(Unit)> for more than 5 seconds.
3 Select [YES] with <- (Unit)> and press
<ENTER (Unit)>.
The message [Shipping ( Wait a moment )] will be
displayed.
4 After the message [Please turn off
the power] is displayed, turn the
power off pressing <Main Power On /
Off button>.
● If the <Main Power On / Off button> is locked,
please disconnect the AC cord plug from the wall
outlet.
Shipping condition
It is possible to reset the following data to the factory
settings.
Settings and set values of [Picture], [Sound], [Setup],
[Position] and [Options] menus
User image registered in [Setup] - [Image settings]
■
Remote control
1 Press <SETUP> to display the [Setup]
menu.
2 Select [OSD language] with
and press <ENTER> for more than 3
seconds.
The following screen will be displayed.
Options
Display software information
LAN data cloning
USB data cloning
Software licenses
Shipping
3 Select [Shipping] with and press
<ENTER>.
Shipping
YES NO
4 Select [YES] with and press
<ENTER>.
The message [Shipping ( Wait a moment )] will be
displayed.
5 After the message [Please turn off
the power] is displayed, turn the
power off pressing <Main Power On /
Off button>.
● If the <Main Power On / Off button> is locked,
please disconnect the AC cord plug from the wall
outlet.