Panasonic LinkRay 70" Class Full HD Commercial LED Display - Manual (Page 90)

English
90
■
LAN settings
1
Click [Detailed set up] in the menu.
2
Click [Next].
The settings window appears, showing the current
settings.
• To change the LAN settings, click [Change].
• To return to the previous window, click [Back].
3 Complete the detailed settings and
click [Next].
In this window, DNS server settings can be made as
well as address information set on the [LAN setup]
menu of the display.
After all required items have been entered, click
[Next]. Then, a confirmation window appears.
Note
● When [DHCP ON] is set, if the DNS server
address is acquired from the DHCP server, the
acquired address is valid.
4
Click [Submit].
The settings will be registered.
Note
● Changing the setting of LAN while connected with
LAN might disconnect the connection.
Adjust clock page
Click [Detailed set up ] → [ Adjust clock].
Time zone selection field
(Japan: GMT + 09:00)
Time zone setting refresh button
Display synchronization selection field
Parent/Child selection field for display
synchronization
Display synchronization setting refresh button
NTP synchronization selection field
NTP server input field
(When setting date and time with NTP
synchronization, enter the IP address or server
name. To enter the server name, setting the DNS
server is required.)
Date entry field
Time entry field
NTP synchronization setting and date setting refresh
button
Note
● Date and time is displayed as [- -] when they are
not set.
● When [Network control] is set to [On] and it is in
standby mode, date and time display will be blank
and they cannot be set. [Time zone], [Synchronize
display] and [NTP synchronization] cannot be set
as well.
● When [SYNCHRONIZE DISPLAY] is set to
[ON] / [CHILD], it is not possible to set [NTP
SYNCHRONIZATION], [Date] or [Time].
● When [NTP SYNCHRONIZATION] is set to [ON] , it
is not possible to set [Date] or [Time].
● If the time becomes incorrect immediately after
setting the correct time, contact the dealer where
you bought the Display.
● [NTP synchronization] operates only in power-on
state or in schedule standby state.