Panasonic LinkRay 70" Class Full HD Commercial LED Display - Manual (Page 53)

53
English
HDMI-CEC settings
Set for HDMI-CEC function.
For details of HDMI-CEC function, refer to “About
HDMI-CEC function”. (see page 108)
[HDMI-CEC settings] - submenu screen
1
HDMI-CEC settings
HDMI-CEC control Enable
Disable
HDMI2 ----
----
HDMI-CEC operation
MENU code
HDMI1
Display → Device
Disable Device → Display
Link function
■
[HDMI-CEC control]
Enables/Disables the HDMI-CEC function.
[Disable]: Disables HDMI-CEC control.
[Enable]: Enables HDMI-CEC control.
Note
● Set to [Enable] to operate HDMI-CEC compatible
device with remote control of the unit.
■
[HDMI1]
Displays the device to operate when HDMI-CEC
compatible device is connected to HDMI 1 terminal.
The control subject can be changed with .
Note
● When there is no connected device, [----] will be
displayed.
■
[HDMI2]
Displays the device to operate when HDMI-CEC
compatible device is connected to HDMI 2 terminal.
The control subject can be changed with .
Note
● When there is no connected device, [----] will be
displayed.
■
[HDMI-CEC operation]
Displays the operation screen of the HDMI-CEC
compatible device.
Press <RETURN> to hide the operation screen.
■
[MENU code]
Changes the code to assign for the [MENU] operation
on the HDMI-CEC operation screen.
Adjust the code to that of the connected HDMI-CEC
compatible device.
■
[ Display → Device ]
Enables/Disables this unit to perform interlocking
control of the HDMI-CEC compatible device.
[Disable]:
Disables this unit to perform interlocking control of the
HDMI-CEC compatible device.
Even if the power status of this unit changes, the
power status of the device will not be affected.
[Power off]:
Turning this unit off (standby) turns off (standby) all
the devices connected to the HDMI 1 and HDMI 2
terminals. The power-on operation is not interlocked.
[Power on / off]:
The device turns on/off (standby) in conjunction with
the power-on/off (standby) operation of this unit.
Note
● For details of operation, refer to “About HDMI-CEC
function”. (see page 108)
■
[ Device → Display ]
Enables/Disables the HDMI-CEC compatible device
to perform interlocking control of this unit.
[Disable]:
Disables the HDMI-CEC compatible device to perform
interlocking control of this unit.
Even if the power status of the device changes, the
power status of this unit will not be affected.
[Power on]:
Turning on the device turns on this unit, and the input
(HDMI1/HDMI2) is switched to that of the device.
[Power on / off]:
The power status of this unit interlocks with the
power-on/off operation of the device.
Note
● For details of operation, refer to “About HDMI-CEC
function”. (see page 108)
● Input will not be switched when [Options] - [Input lock]
is set.