Panasonic LinkRay 70" Class Full HD Commercial LED Display - Manual (Page 48)

English
48
When USB / MEMORY VIEWER is selected
Signal
Noise reduction
MPEG noise reduction
Auto
Off
Frame creation Off
Note
● [Signal] setup menu displays a different setting
condition for each input signal.
● Menu that cannot be adjusted is greyed out.
● [Frame creation] is a function for 65-inch models. This
function is not available for 55/49/43-inch models.
■
[Component/RGB-in select]
This menu is displayed at PC signal input.
Select to match the signals from the source
connected to PC IN terminal.
[Component] YP
B
P
R
/YC
B
C
R
signals
[RGB] RGB signals
■
[YUV/RGB-in select]
This menu is displayed at HDMI 1, HDMI 2, DIGITAL
LINK and DVI-D IN inputs.
Select to match the signals from the source
connected to each terminal.
[YUV] YUV signals
[RGB] RGB signals
Note
● Set for each input terminal (HDMI 1, HDMI 2,
DIGITAL LINK, DVI-D IN).
■
[Sync]
This menu is displayed at PC IN input.
Setting RGB/PC sync signal
[Auto]:
The H and V sync or synchronized signal is
automatically selected. When both of them have
sync signal, H and V sync will be selected.
When displaying CS signal, connect to HD input
terminal.
[on G]:
Uses a synchronized signal on the Video G
signal, which is input from the G connector.
[HV sync]:
Uses a synchronized signal on the Video HD/VD
signal, which is input from the HD/VD connector.
Setting Component sync signal
[Auto]:
The H and V sync or synchronized signal is
automatically selected. When both of them have
sync signal, H and V sync will be selected.
When displaying CS signal, connect to HD input
terminal.
[on Y]:
Uses a synchronized signal on the Video Y
signal, which is input from the Y connector.
[HV sync]:
Uses a synchronized signal on the Video HD/VD
signal, which is input from the HD/VD connector.
■
[Cinema reality]
Faithfully reproduces videos shot with cinema films.
Set this to [Off] normally.
Note
● In [ENGLISH(US)] OSD language, [Cinema reality]
is displayed as [3:2 PULLDOWN].
● If [Cinema reality] is set to [On], videos including
movies shot at 24 frames per second are
reproduced more naturally.
● If the video is unnatural with [On] set, set it to [Off].
■
[Noise reduction]
Reduces picture noise.
[Off]:
Disables Noise Reduction.
[Min], [Mid], [Max]:
Sets strength of Noise Reduction.
[Auto]:
Noise reduction will be automatically selected from
[Min], [Mid] or [Max].
■
[MPEG noise reduction]
Reduces block noise and mosquito noise on MPEG
videos.
[Off]:
Disables Noise Reduction.
[Min], [Mid], [Max]:
Sets strength of Noise Reduction.