Safety precautions, Warning – Panasonic LinkRay 70" Class Full HD Commercial LED Display User Manual

Page 8

Advertising
background image

English

8

Safety Precautions

WARNING

Setup

This LCD Display is for use only with the following

optional accessories.
Use with any other type of optional accessories may

cause instability which could result in the possibility

of injury.

Securely install the pedestal, an optional accessory. Ask

an authorized dealer for installation.

Pedestal

65-inch model

55-inch model

TY-ST55PE9

49-inch model

43-inch model

TY-ST43PE9

Digital Interface Box
ET-YFB100

DIGITAL LINK Switcher
ET-YFB200

Early Warning Software
ET-SWA100 series

*

1

Video Wall Manager
TY-VUK10

*

2

*

1: Suffix of the part number may differ depending on

the license type.

*

2: Supports Ver1.7 or later.

Note

The part number of the optional accessories are

subject to change without notice.

When installing the pedestal, read the operating

instructions supplied with it carefully and install properly.

Also, always use the overturn prevention accessories.
We are not responsible for any product damage, etc.

caused by failures in the installation environment for

the pedestal or wall-hanging bracket even during the

warranty period.
Small parts can present choking hazard if accidentally

swallowed. Keep small parts away from young children.

Discard unneeded small parts and other objects,

including packaging materials and plastic bags/sheets to

prevent them from being played with by young children,

creating the potential risk of suffocation.

Do not place the Display on sloped or unstable

surfaces, and ensure that the Display does not hang

over the edge of the base.

The Display may fall off or tip over.

Install this unit at a location with minimal vibration

and which can support the weight of the unit.

Dropping or falling of the unit may cause injury or

malfunction.

Do not place any objects on top of the Display.
Transport only in upright position!

Transporting the unit with its liquid crystal panel

facing upright or downward may cause damage to the

internal circuitry.

Ventilation should not be impeded by covering

the ventilation openings with items such as

newspapers, table cloths and curtains.
For sufficient ventilation, see page 11.
Caution - For use only with UL Listed Wall Mount

Bracket with minimum weight/load 29.8 (65.7 lbs).
When installing the Display vertically, be sure that

the Power Indicator comes to the upper side.

Power indicator

Heat is generated and it may cause fire or damage to

the Display.

Cautions for Wall or Pedestal Installation

The installation should be performed by an installation

professional. Installing the Display incorrectly may

lead to an accident that results in death or serious

injury. Use the optional Pedestal. (see page 8)

When installing on a wall, a wall hanging bracket that

conforms to VESA standards must be used.

65-inch model

55-inch model

49-inch model

43-inch model

VESA 400 × 400
(see page 11)

Before installation, be sure to check if the mounting

location has enough strength to support the weight

of the LCD display and the wall hanging bracket for

anti drop.

If you terminate the use of the Display on the Wall or

Pedestal, ask a professional to remove the Display as

soon as possible.

When mounting the Display on the wall, prevent the

mounting screws and power cable from contacting

metal objects inside the wall. An electric shock may

occur if they contact metal objects inside the wall.

Do not place the display where it may be affected by

salt or corrosive gas.

Doing so may cause the display to fall due to

corrosion. Also, the unit may malfunction.

Do not install the product to a place where the

product is exposed to direct sunlight.

If the unit is exposed to direct sunlight even indoors,

the temperature rise of the liquid crystal panel may

cause malfunction.

Advertising