Dell OptiPlex 7010 Small Form Factor Desktop Computer User Manual
Page 108
Table 36. System setup options—Security (continued)
Security
SHA-256
This option is enabled by default.
Clear
This option is disabled by default.
PBI Bypass for Clear Commands
This option is disabled by default.
Intel Total Memory Encryption
The Multi-Key Total Memory Encryption (Up to 16 keys) option is disabled by
default.
SMM Security Mitigation
This option is disabled by default.
Absolute
This option is enabled by default.
Chassis intrusion
This option is disabled by default.
Block Boot Until Cleared
This option is disabled by default.
Data Wipe on Next Boot
This option is disabled by default.
UEFI Boot Path Security
The option Always Except Internal HDD is enabled by default.
Authenticated BIOS interface
This option is disabled by default.
Legacy Manageability Interface Access
This option is disabled by default.
Table 37. System setup options—Passwords menu
Passwords
Admin Password
Set, change, or delete the administrator password.
System Password
Set, change, or delete the computer password.
Internal HDD-0 Password
Set, change, or delete the Internal HDD-0 password.
M.2 PCIe SSD-0
Set, change, or delete the M.2 PCIe SSD-0 password.
Password Configuration
Upper Case Letter
Reinforces password must have at least one upper case letter.
By default, the option is disabled.
Lower Case Letter
Reinforces password must have at least one lower case letter.
By default, the option is disabled.
Digit
Reinforces password must have at least one digit.
By default, the option is disabled.
Special Character
Reinforces password must have at least one special character.
By default, the option is disabled.
Minimum Characters
Set the minimum characters allowed for password.
Password Bypass
When enabled, this always prompts for computer and internal hard drive
passwords when powered on from the off state.
By default, the
Disabled
option is enabled.
Password Changes
Enable Non-Admin Password Changes
Enable or disable to change computer and hard drive password without the
need for admin password.
By default, the option is enabled.
Admin Setup Lockout
108
BIOS setup